TeleAdapt MediaHub UHD
|
Installation Guide
TeleAdapt MediaHub UHD
|
Installation Guide
10
11
Additional Information
HDMI Input
The HDMI input on the MediaHub UHD is suitable for connecting
a range of HDMI sources. The resolutions supported will be deter-
mined by the TV but cannot exceed 2160p60. The MediaHub UHD
does not explicitly support 3D formats although, depending upon the
TV, 3D side-by-side and 3D top-and-bottom signals may be sup-
ported. 3D frame-packing is not supported.
The HDMI input will generate an auto-switch event when it detects
+5V from the HDMI source (when a source is plugged in). CEC from
the source device is not supported by the MediaHub UHD nor is it
passed to the TV. The prevents undesirable side effects that could
otherwise be introduced by guest devices.
Bluetooth
The MediaHub UHD supports Bluetooth audio streaming using A2DP.
This profile is commonly supported by most smart phones, tablets
and laptops and will allow audio files to be streamed and played
back via the MediaHub UHD to the TV.
To initiate pairing press the Bluetooth button for about 3 seconds, the
button will flash slowly. Under the Bluetooth settings on the mobile
device or laptop look for a device called “MediaHub” and connect to
it. You may be asked to enter a PIN code which is displayed on the
TV screen.
Audio Input
Connect an audio source and select play. The MediaHub UHD
detects audio using a sampling algorithm to ensure the volume is set
high enough on the source device. Because of the sampling algo-
rithm there may be a short delay in detecting absence and presence
of audio sources.
USB Charging
Both USB ports are configured for high current charging and are
suitable for charging with most mobile phones and tablets.
Removing MediaHub UHD from Furniture
If you need to remove the equipment for any reason please use the
following instructions.
1. First ensure the PSU is disconnected from the mains power
source.
2. Carefully use a medium flat blade screwdriver to release 2 clips on
the bottom of the trim.
3. The trim can now be gentlyr emoved by hand. Be careful not to
bend the trim excessively or it may deform or break.
4. Unscrew the 2 screws or bolts and carefully withdraw the unit from
the furniture being sure not to damage any cables.
5. Cut any cable-ties securing the cables to the main unit then
disconnect the rear cables to release the MediaHub UHD
assembly.
