TeleAdapt MediaHub Mini
|
Installation Guide
7
Maximum Dimensions for HDMI overmould and strain relief
Dimensions are maximum for
overmould and strain relief
Dimension is maximum for
overmould and strain relief
20.0mm
8.8mm
37.0mm
HDMI Cables
It is recommended to use TeleAdapt supplied HDMI cables that
are fully compatible with the MediaHub Mini (CAB-42683D5). If
however, you choose to supply your own HDMI cable, then it must
meet the following specifications in order to be compatible with
the MediaHub Mini:
• Genuine HDMI ATC Certified High Speed (category 2) cable.
• Although HDMI cables with Ethernet support (HEC) will work
with
the MediaHub Mini, it is not necessary to use Ethernet
enabled HDMI cables.
• To avoid damage to the MediaHub Mini the HDMI connector
dimensions (overmould and strain relief) should be within the
dimensions shown below.
Genuine HDMI ATC Certified High Speed cables will work well with the
MediaHub Mini. However if you require an HDMI cable in excess of 10
metres please contact TeleAdapt about a range of suitable solutions
(see contact details on page 21 of this guide).
Continued on page 8
