Tele System TS6212, Руководство пользователя

Страница: 18 / 24

TS6212
5
3 First time installation
After connecting the receiver (section 0) and inserting the power cable in the main power socket, the receiver
will automatically turn on. If this doesn’t happen, turn on the receiver using the ON/ST.BY button on the front
panel or on the remote control.
The
Installation menu will appear on the screen where you will have to confirm or modify some parameters.
4 Menu and sub-menus
4.1 Setup
4.1.1 Installation

Country setting
Press the ◄ / ► arrows to select your Country from the list. Press the ▼ arrow to go to the next
parameter.
CAUTION!
Wrong Country setting can cause you to receive few or no channels at all.

OSD language
Using the ◄ / ► arrows, select the language desired from the On Screen Display (OSD). Press the ▼
arrow for the next setup.

Audio language
Using the ◄ / ► arrows, select the audio language desired from those available (in case the TV program
is transmitted in several languages the receiver will automatically choose the language selected, if
available). Press the
▼ arrow for the next setup.

Subtitles language
Using the ◄ / ► arrows, select the subtitles language desired from those available (in case the TV
program is transmitted with subtitles the receiver will automatically choose the language selected, if
available). Press the
▼ arrow for the next setup.

LCN
1. After scanning the channels, Logical Channel Numbering (LCN) automatically orders the list of TV and
Radio channels according to the position requested by television stations. We advise you keep this
function active. However, you can modify it using the
◄ / ► arrows. Press the ▼ arrow for the next step.
NOTE

If the LCN Mode is active, we suggest you not use the move channel function available from the TV – TV/Radio
List menu.

Auto stand by
This receiver comes with an energy saving function: after three hours of user inactivity, the receiver will
automatically go into standby mode. Two minutes before this happens, a message will appear on the
screen so that the user can stop the appliance from going into standby.
Using the
◄ / ► arrows, chose ON to keep the option active, or OFF to deactivate it.
Press the ▼ arrow for the next step.
CAUTION
If the on-off timer or a recording from the menu System Setup – Program Timer is set to more than three hours, it
is suggested you deactivate Sleep timer

GMT Usage
Select using the ◄ / ► arrows:
o
“ ON ”: date and time related to the Country chosen are set automatically.
o
“ OFF ”: user manually sets the date and time.
Press the ▼ arrow for the next step.

Time zone
Using the ◄ / ► arrows, select the time zone of the country where the decoder is installed.
Press the ▼ arrow for the next step.

Set Date