17
2.
LNB type
: inferior/superior frequency of the local oscillator of the
converter
3.
LNB power
: LNB supply for switching between horizontal and vertical
polarization
4.
22KHz
: signal at 22KHz switching between high and low band
5.
Tone burst
: none.
6.
DiSEqC 1.0 o DiSEqC 1.1
:
select the LNB number based on its aerial
system (i.e. Dual-feed: Hot Bird 13°E on LNB1 and Astra 19.2°E on LNB2)
7.
Motor: none.
NOTE
Repeat the above procedure for each satellite for which you want to perform a
channel search
8.3.2
Channel search for satellite
Se the procedure illustrated in paragraph 8.1.2
8.4
Motorized Antenna
The configuration differs depending on the type of engine used to implement the
system, the TV is able to control the movement/rotation of the antenna manually
(DiSEqC 1.2) or semi-automaticlly (also known as DiSEqC 1.3 USALS).
8.4.1
DiSEqC 1.2
From the Antenna Setting menu, make the following choices:
1.
Satellite
: chose the desired satellite. Highlight the satellite and press OK
to confirm and press
►
.
2.
LNB type
: inferior/superior frequency of the local oscillator of the
converter
3.
LNB power
: LNB supply for switching between horizontal and vertical
polarization
4.
22KHz
: signal at 22KHz switching between high and low band
5.
Tone burst
: none
6.
DiSEqC 1.0
: none
7.
DiSEqC 1.1
: none
8.
Motor
:
DiSEqC 1.2
