22 l
EN
7.4.7-Decoder Setting
You can set the Decoder Setting tab to
On/
Off
by pressing the
Right/Left
navigation
buttons. When it is set to
ON
, RF signal
will be output from the SCART output. This
option must be set to
ON
when a Decoder
is connected to SCART. When this option
is set to
OFF
, RF signal will not be output
from the SCART output. This option appears
in the menu when the Signal Source is set
to SCART. It is not displayed in the menu in
other options.
7.5-Parental Control
In the Parental Control menu, you can
preclude channels that are not appropriate for
children and set age restriction for programs
being broadcasted. Password screen will be
displayed when entering this menu. The menu
will open only when the correct password is
entered. The default password is set as
0000
.
You can change the password from the Set
PIN menu as you wish.
Set PIN menu will be displayed. Once you
enter your new password two consecutive
times, your password will be changed.
Note:
If you forget your password, you can
enter 2356 to unlock the locked channels and
specify a new password by reentering to the
PIN input menu.
7.5.3-Block Program
With the Block Program feature, you can
lock the desired channel and prevent it from
being viewed unless the correct password is
entered. To do this, select
Block Program
tab from the Parental Control menu by
pressing the
UP/Down
navigation buttons
and confirm your selection with
OK
button.
Block Program menu will be displayed. Select
the channel you want to block from the Block
Program menu with
Up/Down
buttons and
confirm with the
GREEN
button on your
remote control. A lock symbol will appear
next to the channel name. When a blocked
channel is selected, the password screen will
be displayed and the channel will not appear
until the correct password is entered. If you
do not enter the password, a lock symbol will
be displayed on the screen. There will also be
a lock symbol next to the blocked channel in
the Program Table. Repeat the same steps to
remove the blocking.
7.5.4-Parental Guidance
If it is supported by the broadcaster,
this feature allows you to enter an age
restriction between 4 and 18 for the
programs broadcasted. If the program to be
broadcasted is over the age restriction you
entered, the channel will not be displayed and
a password screen will appear. To view the
program, correct password must be entered.
Enter an age limit between 8 and 18 from the
Parental Guidance tab in order to activate this
feature.
7.5.5-Panel Lock
If this feature is turned On, the control buttons
on your LCD Television will be locked and
will not function. When it is set to off, control
buttons will become active.
PARENTAL CONTROL
Lock System
Off
Set PIN
Block Programme
Parental Guidance
Off
Select
Back
Exit
Panel Lock
Off
7.5.1-Lock System
When the Lock System feature is set to
On
,
a password is prompted if you want to enter
in the
Auto Tuning
,
Digital
Manual
Tuning
,
Analogue
Manual
Tuning
submenus in the
Channel Setup
menu and the
Program
Table
menu. These menus are not accessible
unless the correct password is entered.
7.5.2-Set PIN
You can change your Parental Control
password from this menu as you wish. To do
this, select
Set PIN
tab and press
OK
button.
Содержание PALCO19/L04
Страница 1: ......
