Tele System P-Link Nano Скачать руководство пользователя страница 6

P-Link Nano

1

Safety Regulation

We advise you to read the following advice concerning the safety regulations carefully in order to ensure safe use of
the appliance.

ELECTRICAL SUPPLY

The appliance should be supplied by using a voltage of 100-240 Volt AC, 50/60 Hz. The appliance must not be
repaired in any way by the user, in case of breakages or failures please refer to the nearest center for assistance.
Do not remove the cover. The inside of the appliance could contain higher voltages than that of the supply voltage
which could endanger the user. The device should be disconnected from the electrical supply before performing any
intervention.

Non-authorised removal will mean that the warranty is no longer valid!

LIQUIDS

Keep the appliance far from any liquids. Do not place any objects containing liquids on the appliance, such as vases,
humidifiers etc. The appliance must not be installed in areas where it could come into contact with sprays or drops
of water or in an environment with a high level of humidity where condensation could occur. If the device should
accidentally come into contact with liquids, disconnect immediately from the power socket. DO NOT TOUCH the
device until it has been disconnected.

SMALL OBJECTS

Keep the receiver away from coins or other small objects. Objects which fall into the appliance via the ventilation
gaps could cause serious damage.

CLEANING

Before cleaning, disconnect the device from the power supply. To clean the outside of the reciever use a soft and
dry or slightly damp cloth. Avoid using products which contain chemicals or solvents.

VENTILATION

Make sure that the area where the appliance is to be installed has good air circulation so that the heat can be
dissipate well in order to avoid overheating. In order to allow enough ventilation it is necessary to have a distance of
at least 10 cm on either side of the appliance and 15cm above the appliance. The vents must be kept clear from any
obstructions such as newspapers, table cloths, furnature material, curtains, carpets etc. Avoid installing the receiver
close to any heat sources (i.e. radiators, stoves etc) or on top of any other appliances which omit heat (video players,
DVD etc).

WARNING!!!

Keep the appliance out of reach of children. The plastic bags used for packaging can be dangerous. To avoid
suffocating keep the bags out of reach of children. Do not expose the receiver or remote control to direct sunlight.
The appliance must be placed on a solid and stable base.

Connect the device to the power supply only after installation is complete. Dispose of the product
correctly so as to avoid damage to the environment and human health as well as to facilitate recycling
of the components/materials used in the appliance. If the product is not disposed of properly this
could be punishable according to the involved law. The manufacturers recommend that the parts are
recycled seperately and are taken to sites which conform to current regulations.

2

Содержание P-Link Nano













Отзывы: