English
TS ULTRA 4K
19
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
10.
You have forgotten your PIN.
Do a factory reset (par. 5.6) and define
a new PIN during installation
11.
You cannot move the channels.
The LCN function is active.
You need to do factory reset (par. 5.6):
LCN editable only during the setup
wizard (chap. 3).
12.
The receiver turns itself off.
The automatic shutdown is activated.
Refer to paragraph 5.7.
13.
When turning the device on after
standby, the receive takes a long
time to boot up.
Power Saving is activated.
Refer to paragraph 5.7.
WARNING
Generally, in the event of abnormal behavior of the receiver, a factory reset (par. 5.6) and/or a system reboot (power off >
power on) can help solve your problem.
