12
13
Program the receiver T60RX-04xSL
Program/Erase the interlock function
Program as follows.
1.Press the function key three times so that the green LED no 8 comes on
(Programming the interlock).
2.Now press the select button.
-The red LEDs above relays 1 and 2 come on.
3.Press the select button and select whether the
fi
rst relay should be toggling
or not. If the yellow LED is on the relay is toggling, if it is out the relay is
not toggling.
NOTE! Press the function key once to program interlocking over
relays 3 and 4.
4.Continue to press the function key until all four relay
LEDs have gone out.
-Green LED no. 8
fl
ashes once (the function is now stored).
Interlocking is now programmed.
-The Green LED no. 8
fl
ashes and indicates that
interlocking is programmed.
GB
NL
SWE
D
GB
NL
SWE
D