CHAPTER 5: OPERATION
5.1 General inf ormation
5 .1 .1 REC EI V ERS W I T H L O G I N /L O G O UT
1
F UN C T I O N A C T I V A T ED
To control a receiver, the transmitter must be registered and logged in to the
receiver. If another transmitter is already logged in to the receiver, it must be
logged out before a different transmitter can be logged in.
If no transmitter is logged in to the receiver, the first registered transmitter to be
started will automatically log in to the receiver. Once a transmitter has been logged
in, it will remain logged in until it is manually logged out.
More than one transmitter can be registered in the receiver, but only one
transmitter can be logged in at a time.
NOTE: For the logout function to work, BOTH the receiver and the transmitter
must have the logout function activated and be set to continuous radio mode.
5 .1 .2 REC EI V ERS W I T H O UT L O G I N /L O G O UT F UN C T I O N O R W I T H
L O G I N /L O G O UT F UN C T I O N I N A C T I V A T ED
To control a receiver, the transmitter must be registered in the receiver.
If no transmitter is controlling the receiver, the first registered transmitter to be
started will automatically take control of the receiver. Switching the transmitter off
will free the receiver and allow any other registered transmitter that is started to
control the receiver.
More than one transmitter can be registered in the receiver, but only one
transmitter can control the receiver at a time.
5 .1 .3 MUL T I PL E T RA N S MI T T ERS REG I S T ERED I N A S A ME
REC EI V ER
If more than one transmitter is registered in the same receiver, it is recommended
to select the same frequency channel on all transmitters.
1
For more information about login/logout, see the transmitter installation instruction
ED-PN-TX104-EN-v01
15
