manualshive.com logo in svg

Tele Radio PN-T21-10, Руководство по установке, Страница: 9 / 18

Поделиться
Скачать
Tele Radio PN-T21-10 Скачать руководство пользователя страница 9

CHAPTER 3: OPERATION

REGISTER THE TRANSMITTER IN THE RECEIVER

Do not perform this action when the receiver is in a session with another 
transmitter. The radio communication may be interrupted or broken.

NOTE! Only keep the transmitters that you intend to use registered in the receivers.

NOTE! To establish a radio link between the transmitter and the receiver, both units must be set to the 
same radio mode.

 

 1.  Press the receiver Function button.

The function LED lights (red).

 2.  Press the receiver Select button.

The relay LEDs light (red).

 3.  Press buttons 1 and 2. Keep pressed.

The relay LEDs light (red). The relay LEDs flash (red) 2 times. 

 4.  Release buttons 1 and 2.

The relay LEDs flash (red) 1 time.
The transmitter is registered.

If no transmitter is found within approximately 10 seconds, the receiver exits to normal operation.

START THE TRANSMITTER

 1.  Start the transmitter by pressing any button on the transmitter.

The top LED lights (green when the battery capacity is good, red when the battery capacity is 
poor).

SWITCH THE TRANSMITTER OFF

 1.  The transmitter switches off when no transmitter button is pressed.

- 9 -

Содержание PN-T21-10



















Отзывы:

Нет отзывов