1.2 Connections
Note
BEFORE INSTALLING THE ROUTER, PLEASE READ THE FOLLOWING INSTRUCTIONS CARE-
FULLY
Workplace Conditions. Main Characteristics
• Excessive cold and heat should be avoided, as should humidity and dust.
• Avoid direct exposure to sunlight and any other heat sources. Do not place the device between papers, magazines
or other items that could hinder natural air circulation.
• Do not place the device near strong electromagnetic fields such as those produced by speakers, motors, etc.
• Avoid knocks and/or strong vibrations during operation, storage and transport.
Warning
The electric current in power cables, telephone lines and communication cables is dangerous.
To prevent electric shocks, before installing, handling or opening the equipment covers, con-
nect and disconnect the cables following the steps set forth in the following sections:
1.2.1 If the Ethernet cable is POE
To Connect
To Disconnect
Check the Ethernet cable is not connected to the device.
Disconnect the Ethernet cable.
Check the power supply is not connected to the device.
Disconnect the power supply from the device.
Check the power supply is not connected to the mains.
Disconnect the power supply from the mains.
If you need redundant power, connect the power supply
to the mains.
If you need redundant power, connect the power supply
to the device.
Connect the Ethernet cable.
1.2.2 If the Ethernet cable is not POE
To Connect
To Disconnect
Check the power supply is not connected to the device.
Disconnect the power supply from the device.
Check the power supply is not connected to the mains.
Disconnect the power supply from the mains.
Connect the power supply to the mains.
Connect the power supply to the device.
Teldat S.A.
1 Device Installation
Teldat-3Ge-USB Installation Manual
3
