File transfer OK
Wait for upgrade checking
Upgrade verified
Done!
Unlocking FTP buffer
Do you want to erase upgrade file from memory?(Yes/No)? n
Note atm2/0 may change depending on the specific hardware configuration or port to be upgraded.
If the upgrade is not needed, this will be the output:
DUT atm2/0 upgrade-fw start
Locking FTP buffer
Upgrade file len 17168512 bytes
Upgrade file version 1.0.0.0 0.0.0.0
Upgrade file checksum verification ok
UBoot Version '1' (2)
OS Version '1' (2)
About to set upgrade OS mode
Wait until the command finishes
Upgrade version matches installed version!
Unlocking FTP buffer
Do you want to erase upgrade file from memory?(Yes/No)? n
If the upgrade has been started through an access provided by the port being updated, the connection will be inter-
rupted.
Once the upgrade has finished, communication will be restored and the process-related log can be retrieved:
DUT atm2/0 upgrade-fw show-log
----- UPGRADE FW LOG BUFFER START (302) -----
Locking FTP buffer
Upgrade file len 17168512 bytes
Upgrade file version 1.0.0.0 0.0.0.0
Upgrade file checksum verification ok
UBoot Version '1' (2)
OS Version '1' (2)
About to set upgrade OS mode
Wait until the command finishes
Upgrade version matches installed version!
Unlocking FTP buffer
----- UPGRADE FW LOG BUFFER END -----
You may not want to release the temporal buffer in case you want to upgrade more than one card or port.
As soon as the upgrade file is not needed, it can be released:
DUT atm2/0 upgrade-fw release-mem
File erased!
DUT atm2/0 upgrade-fw release-mem
No file to be erased
Teldat S.A.
3 Installing the TBC1-GFAST Expansion Card
TBC1-GFAST card
7
