Teldat elmeg IP130 Скачать руководство пользователя страница 138 | Manualshive

Страница: 138 / 165

background image

elmeg IP130 / en / elmegIP130_v1 / appendix.fm / 29.08.2012

V

e

rsion 2, 27.0

5

.2010

137

elmeg IP130

Teldat

Appendix

Using free software

GNU GPL, GNU LGPL, BSD licence, OpenSSL licence

The elmeg IP130 includes free software that is licensed under the GNU General Public Licence.
This free software was developed by a third party and is protected by copyright.

The software is provided free of charge. You are authorised to use this free software in accord-
ance with the above-mentioned licence conditions. In the event of contradictions between
these licence conditions and the Teldat GmbH licence conditions that apply to the software, the
above-mentioned licence conditions shall take precedence for the free software.

The GNU General Public Licence (GPL) is supplied with this product. The licences can be read in
the following chapters.

In addition, you can download the licence conditions from the Internet:

u

The

GPL

is available on the Internet at: www.fsf.org/licensing/licenses/gpl.txt

u

Unauthorised translations of the GPL

are available on the Internet at:

www.gnu.org/licenses/translations.html

u

The

source text, including copyright notices for the free software,

is available on the

Interne at: www.teldat.de

To obtain more information on the source text of the free software please contact us via
[email protected].

Use of the free software included with this product, that goes beyond the program sequence
intended by Teldat GmbH, shall be at the user's own risk and no claim based on liability for
defects can be made against Teldat GmbH. The GNU General Public Licence contains references
to the liability for defects of the authors or other holders of rights to the free software.
You shall have no right to assert a claim against Teldat GmbH based on liability for defects if a
defect in the product was or could have been caused by changes you have made to the pro-
grams or their configuration. Furthermore, you shall have no right to assert a claim against Tel-
dat GmbH based on liability for defects if the free software violates the copyright of third par-
ties.

Teldat GmbH shall provide no technical support for the software, including the free software
included within it, if it has been changed.

«
...
136
137
138
139
140
...
»

Содержание elmeg IP130






































































































































































Отзывы:

Нет отзывов

Похожие инструкции для elmeg IP130

T-Mobile KX-HDV130

Бренд: Panasonic Страницы: 104

Бренд: Panasonic Страницы: 13

Бренд: Panasonic Страницы: 40

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 8

Бренд: Panasonic Страницы: 4

Бренд: Panasonic Страницы: 28

Бренд: Panasonic Страницы: 36

Бренд: Pantech Страницы: 116

Бренд: Xblue Networks Страницы: 106

Бренд: Telesis Страницы: 11

Бренд: Collage Investments Страницы: 34

Бренд: Aastra Страницы: 24

Бренд: Verykool Страницы: 30

Бренд: Videocon Страницы: 28

Бренд: Icemobile Страницы: 11

Бренд: Polycom Страницы: 9

COMMUNICATOR C100S

Бренд: Polycom Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды