elmeg IP120 / en / elmegIP120_v1 / web_configurator.fm / 01.08.2012
V
e
rsion 2, 27.0
5
.2010
64
elmeg IP120
Teldat
Web configurator – configuring the phone on a PC
Web configurator – configuring the phone on a PC
The Web configurator provides you with a user interface that you can use to operate and con-
figure your elmeg IP120 on the PC. The setup assistant makes it easier for you to set your device
up for the first time.
Prerequisite:
Your phone is connected to the local network.
In most cases, this connection is established automatically as soon as you connect the device
with a network cable (
). If this is not the case, you establish the connection to the
local network via the display menu when you set the device up for the first time (
Starting the Web configurator
You will need the IP address for your phone. You will find this via the phone’s display menu, in
the LAN settings:
‰
¢
Settings
¢
Local Network
.
Accessing the Web configurator:
¤
Launch the Internet browser on your PC.
¤
Enter the IP address in the browser's address field:
Example:
The login screen appears.
¤
Select the appropriate language.
¤
Select the desired user type and enter the corresponding password:
¤
Click on
OK
.
The Web configurator will now start.
Please note
The Web configurator supports the following browsers:
– Mozilla Firefox, version 3.6 or higher
– Internet Explorer, version 7 or higher
– Apple Safari, version 5 or higher
Please note
The IP address can sometimes change, depending on the settings of the DHCP server in your
network.
User
If you want to operate your phone on the PC.
Default password:
user
Administrator
If you want to configure your phone.
Default password:
admin