Fig. 19:
WAN connectors
Note
During booting and in BIOS mode, the WAN connectors do not work.
3.7.3 Connecting a 3G USB device (USB connector)
The Teldat Atlas-i70 router has a USB HOST 2.0 Type A connector interface. It allows 3G USB modems to be con-
nected. The interface can be activated by purchasing the corresponding software license.
Fig. 20:
3G USB Connector
3.7.4 Connecting for Configuration
The Teldat Atlas-i70 has a RJ45 female connector on the front panel (labeled Aux) that provides access to the
device's local console.
For further information, please see
Connecting to the device
on page 23.
Fig. 21:
Aux. Connector
3.8 Optional Storage
The applications running in the second core of the device processor can increase the features of the Teldat Atlas-
i70 router.
To access said features, the device must have an internally-installed hard disk or an SD flash memory expansion.
Note
Please see the Teldat website http://www.teldat.com for a list of supported hard disks.
3.8.1 Procedure to install a hard disk
To correctly insert a hard disk, please carry out the following steps:
(1)
Switch off the device and remove the data cables as described under section
Disconnecting
on page 11.
(2)
Remove the device from the workplace and place it in a stable and safe location, where it can be easily ac-
cessed and handled.
(3)
Unscrew the screws on the front panel to extract the tray for hard disk access.
Teldat S.A.
3 Components and Power Supply
Teldat Router Atlas-i70
15
