Chapter 2 ATLAS 60 NW Routers
2.1 Characteristics
The ATLAS 60 NW routers are modular devices that combine router and switch functions in a single device. They
have been designed for a corporate environment, and include advanced security among their characteristics. The
ATLAS 60 NW routers incorporate encryption hardware.
The ATLAS 60 NW executes the Teldat CIT (Teldat Internetworking Code - Código de Internetworking de Teldat),
which runs in all Teldat router families and is characterized by a wide variety of functionalities. It is especially de-
signed to satisfy the access requirements to corporate data networks. CIT offers management capabilities, the pos-
sibility of implementing Quality of Service mechanisms (both at the link layer and at the network layer) and security
mechanisms, the potential to create Virtual Private Networks through IPSec or L2TP, plus an extensive range of pro-
tocols and IP routing functionalities.
The ATLAS 60 NW router family can be expanded by means of a PMC card, allowing you to increase the range of
interfaces in the device.
This manual shows you how to install and connect these devices.
2.1.1 Power supply
For further information on the different ATLAS 60 NW power supplies, please see
Power Source
on page 16 in
Com-
ponents and Power Supply
on page 4.
2.1.2 Hardware Monitoring
The only way to monitor the ATLAS 60 NW router family hardware is through the LEDs on the front panel. These in-
dicate the state of the hardware components, if there is connectivity, data flow, etc.
For further information on the LED panel, please see
Components
on page 4 in the following chapter.
Teldat S.A.
2 ATLAS 60 NW Routers
ATLAS 6x/i6x NW Router
3
