against power malfunctions as it is already protected.
To avoid electric shocks, residual current circulation and other unwanted effects, also affecting data communications,
the following is recommended:
Warning
All interconnected communication devices should be plugged to THE SAME GROUNDED POWER
OUTLET, which should at the same time be of good quality (lower than 10 ohms).
Whether the workplace is provided with an uninterrupted power supply system (UPS), regulated supply
or it is independent from the rest (such as lighting, etc.); it is highly recommended that all data devices
should be connected to the same power source. This will avoid operating and premature aging prob-
lems of drivers and other components.
Warning
The electric current in power cables, telephone lines and communication cables is dangerous. To pre-
vent electric shocks, before installing, handling or opening the equipment covers, connect and discon-
nect the cables as follows:
To Connect
To Disconnect
Ensure that the on/off power supply switch is in the OFF
position.
Place the on/off power supply switch in the OFF position.
Connect all data cables.
Disconnect the power supply from the device.
Connect the power supply to the device.
Disconnect the data cables.
Place the device’s on/off power supply switch in the ON
position.
To connect the power source to the device, follow the steps listed in the previous table: ensure that the switch is OFF
(0) and the power supply is NOT connected to the main electricity supply; find the POWER plug (located on the rear
panel of the device) and plug it into the power source. Both the connector and the receptacle are designed so it is
only possible to insert it in the correct position.
Fig. 2:
Power Supply Connection
1.2.1 Data Connection
The ATLAS 152 router has the following available connectors:
SWITCH:
The ATLAS 152 incorporates an 8 port Switch 10/100BaseT with automatic MDI/MDIX to connect to the LAN. It has
a 100 LED, indicating connection at 100 Mbps, and a 10 LED, indicating connection at 10 Mbps
Please pay close attention to the labeling. This is important in order to avoid confusing the switch with other types of
ports.
Teldat S.A.
1 Installing the Router
ATLAS 152
3
Содержание ATLAS 152
Страница 4: ...Table of Contents Teldat S A ii ATLAS 152...
