Teldat 4Ge, Руководство по установке

Страница: 15 / 33

Procedure
Step 1 Install the two screws (3.5x30) horizontally apart on a wall or any other vertical surface.
The screws should protrude 0.6 cm (0.25 inch) from the surface of the wall.
Warning
If you install the screws in drywall, use hollow-wall anchors (8 mm – 5/16 inch) to secure the screws. If
the screws are not properly anchored, the strain of the cables connected to the router back panel could
pull the router from the wall.
Note
- Wall mounting accessories are not provided and must be acquired separately.
- The accessories must match the kind of wall in place and support the weight of the device.
3.2.4 Ceiling mounting
To attach the Teldat 4Ge device to the ceiling, use the appropriate support (not included and must be ordered separ-
ately).
Fig. 9:
Ceiling mounting support
3.2.5 Installing a DIN rail mount accessory (Optional)
Router packaging may contain a DIN rail mount kit, which can be attached to the router to place it in various posi-
tions.
3 Components and Power Supply Teldat S.A.
10 Teldat 4Ge Router
Step 2 Hang the router on the screws. This is the appropriate position for safe use. (See Fig. 8 on page 9)