Telcoma Automations FM420U, Инструкции по эксплуатации и программированию

Страница: 7 / 12

EN
Press key 5 to confirm. The text appears briefly and the
radio control returns to normal operating status.
- Maximum number of channels Display of channels can be set to the
minimum indispensable, to optimise search times.
Procedure:
To increase battery lifetime, set a short delay interval.
Groups C1 and C2 are only displayed if programmed.
From the secondary menu, press key 5 to select
Use key 3 (indicated in the drawing) or 1 to scroll through values
00 to 20.
Example: on selection of 12, all channels from 00 to 15 will be
displayed.
Press key 5 to confirm. The text appears briefly and the radio
control returns to normal operating status.
Use key 2 (indicated in the drawing) or 4 to scroll through values
to corresponding to a display shutdown delay from
approx. 2 to 10 seconds.
7
EN
6
Use the central key to complete programming of C2. The text
is displayed briefly, followed by after which the display
turns off.
Access to secondary menu
This menu contains the following functions:
- Display shutdown delay setting
- Maximum channel number setting
- Channel 00 repetition function
- Firmware Version
Procedure to enable secondary menu:
Press and hold the keys indicated in the drawing for approx. 10
seconds until appears.
key 3 (indicated in the drawing) or 1 to scroll through the menu
until the required function is displayed
- Display shutdown delay
The channel remains on display after release one of the keys for a time
interval that can be modified as follows:
From the secondary menu, press key 5 to select