22
User Guide
Metrobility T3/E3 23
Product Safety, EMC and Compliance Statements
This equipment complies with the following requirements:
• UL • ITU-G.703
• CSA • G.704
• EN60950 (safety) • G.706
• FCC Part 15, Class A • ANSI T1.403-1999
• EN55022 Class A (emissions) • ANSI T1.408
• EN55024: 1998 (immunity) • Class 1 Laser Product
• IEC 825-1 Classification • ICES-003 Class A (emissions)
• CB
This product shall be handled, stored and disposed of in accordance with all gov-
erning and applicable safety and environmental regulatory agency requirements.
The following
FCC
and
Industry Canada
compliance information is applicable to
North American customers only.
USA FCC Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy, and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Caution:
Changes or modifications to this equipment not expressly approved by
the party responsible for compliance could void the userʼs authority to operate the
equipment.
Canadian Radio Frequency Interference Statement
This Class A digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Réglement sur
le matériel brouilleur du Canada.
