Telco Systems Metrobility 10/100 AutoTwister 2643-13-01 Скачать руководство пользователя страница 20

Страница: 20 / 24

User Guide

Technical Specifications

Network Connections

Twisted-Pair Interface

Connector ______________________________________Shielded RJ-45, 8-pin jack

Impedance ____________________________________________100 Ohms nominal

Signal Level Output (peak differential) _________________.95 to 1.05V (100Mbps)

___________________2.2 to 2.8V (10Mbps)

Signal Level Input _____________________________ 200mV minimum (100Mbps)

_____________________________ 585mV minimum (10Mbps)

Supported Link Length ____________________________________________ 100m

Cable Type (10Mbps segments) ___________________ Category 3, 4 or 5 UTP/STP

(100Mbps segments) ___________________ Category 5 or 5E UTP/STP

Multimode Fiber Optic Interface

(2643-13-01, 2643-15-01, 2643-1E, 2643-1G-01, 2643-1K-01)

Connector _____________________________________ SC, ST, MT-RJ, VF-45, LC

Wavelength ___________________________________________________ 1310nm

RX Input Sensitivity ___________________________________ -31 dBm maximum

Output Power ___________________________ -23.5 dBm to -14 dBm (50/125 µm)

_________________________ -20 dBm to -14 dBm (62.5/125 µm)

Typical Link Budget ______________________________________________ 17 dB

Supported Link Length ________________________________up to 2km full duplex

Cable Type _____________________________________ 50/125, 62.5/125 µm F/O

Singlemode Fiber Optic Interface

(2643-14-01, 2643-16-01, 2643-1M-01)

Connector __________________________________________________SC, ST, LC

Wavelength ___________________________________________________ 1310nm

RX Input Sensitivity ___________________________________ -31 dBm maximum

Output Power _______________________________-15 dBm to -8 dBm (9/125 µm)

Typical Link Budget ______________________________________________ 23 dB

Supported Link Length _______________________________up to 20km full duplex

Cable Type _______________________________________________9/125 µm F/O

Singlemode Fiber Optic Interface — long haul distance support

(2643-17-01)

Connector ________________________________________________________ SC

Wavelength ___________________________________________________ 1310nm

RX Input Sensitivity ___________________________________ -31 dBm maximum

Output Power ________________________________ -5 dBm to 0 dBm (9/125 µm)

Typical Link Budget ______________________________________________ 33 dB

Supported Link Length _______________________________up to 40km full duplex

Cable Type _______________________________________________9/125 µm F/O

Содержание Metrobility 10/100 AutoTwister 2643-13-01

























Результаты поиска

Содержание Metrobility 10/100 AutoTwister 2643-13-01

Отзывы:

Бренды по названию

Популярные бренды

Telco Systems Metrobility 10/100 AutoTwister 2643-13-01, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Metrobility 10/100 AutoTwister 2643-13-01

Отзывы:

Бренды по названию

Популярные бренды