TEK 1201-HD Presentation Switcher
TEKVOX, Inc.
11
www.tekvox.com
512.808.0845
10. TCP/IP Controlling
The optional network port of TEK 1201-HD is used for sending commands using TCP/IP control.
These commands are sent the same as when using RS-232 control. There is no Web based control
for the unit. The Web interface is used for network configuration only.
10.1 IP Configuration
To connect a computer to the network port you must use a crossover network cable or network
switch. Set its IP address of the PC to the same IP VLAN as the default IP is address or the unit
(192.168.0.178).
Enter the IP address 192.168.0.178 into Internet Explorer, you will see the LOGIN page as below:
Same IP section but
cannot be 192.168.0.178
