www.tekvox.com
Auto-Tracking Camera
79068-STD-10T User Manual
5. Remote Control
5.1 Keys Instruction
After finishing initialization, the camera can receive and execute IR commands. Press the remote
control button until the indicator light flashes; release the button, and the indicator light will stop
flashing. Users can control the pan/tilt/zoom, and setting & running preset positions, via the IR
remote controller.
In these instructions, “press the key” means a click rather than a long-press, and a special note will
be given if a long-press for more than one second is required.
No. Key Name
Brief Instruction
1
Standby
After a 3s long press, the camera will go into standby mode.
Long press 3s again, and the camera will self-test again and
go back to HOME position. (Note: If power-on mode is turned
on and Preset 0 is set, and there is no operation within 12s, it
will automatically point to the specified preset position.
2
Camera Address Selection
Select the camera address to control
3
Number Keys
Set or run presets 0-9
4
* / # Keys
Key combination use
5
Focus Controls
Auto Focus
: Enter into auto focus mode.
Manual Focus
: Enter into manual focus mode
Switch the camera focus mode to manual focus by pressing
[focus +] or [focus -] to adjust.
Press and hold the key, and the focus will continue to change,
and stops as soon as the key is released.
6
Zoom Controls
Zoom+:
Lens near
Zoom–:
Lens far
Press and hold the key, and the camera will keep zooming in
or zooming out, and stops as soon as the key is released.
7
Set / Clear Preset
Set Preset:
“Set preset” key + 0-9 number key:
Clear Preset:
“Clear preset” key + 0-9 number key
8
Pan/Tilt Controls
Press Key: Up
Press Key: Down
Press Key: Left
Press Key: Right
“HOME” Key: Return to the middle position or enter into the
next level menu
Press and hold the up/down/left/right key, and the pan/tilt will
keep running, from slow to fast, until it runs to the endpoint;
the pan/tilt stops running as soon as the key is released.
9
BLC Control
BLC ON / OFF: Turn the back light on or off
10
Menu Setting
Open or close the OSD menu
Enter / exit the OSD menu, or return to the previous menu.
