European contact.
Tektronix UK, Ltd.
Western Peninsula
Western Road
Bracknell, RG12 1RF
United Kingdom
Australia / New Zealand Declaration of Conformity – EMC
Complies with the EMC provision of the Australia
Radiocommunications Act 1992 per the following standard,
in accordance with ACMA:
EN 55022:2006 Class B – Radiated and conducted
emissions, in accordance with EN 55103-1:2009
Supplier Code: N60
Australia / New Zealand contact.
Baker & McKenzie
Level 27, AMP Centre
50 Bridge Street
Sydney NSW 2000, Australia
Environmental considerations
This section provides information about the environmental
impact of the product.
Product end-of-life handling
Observe the following guidelines when recycling an
instrument or component:
Equipment recycling.
Production of this equipment required
the extraction and use of natural resources. The equipment
may contain substances that could be harmful to the
environment or human health if improperly handled at the
product’s end of life. In order to avoid release of such
substances into the environment and to reduce the use of
natural resources, we encourage you to recycle this product
in an appropriate system that will ensure that most of the
materials are reused or recycled appropriately.
This symbol indicates that this product
complies with the applicable European
Union requirements according to Directives
2002/96/EC and 2006/66/EC on waste
electrical and electronic equipment (WEEE)
and batteries. For information about recycling
options, check the Support/Service section of
the Tektronix Web site (www.tektronix.com).
Restriction of hazardous substances
This product is classi
fi
ed as an industrial monitoring and
control instrument accessory, and is not required to comply
with the substance restrictions of the recast RoHS Directive
2011/65/EU until July 22, 2017.
Product description
The Tektronix WFM200BC External Battery Charger
is intended for use with only the Tektronix Lithium-Ion
WFM200BA Rechargeable Battery Pack.
NOTE.
Refer to the WFM200BA Rechargeable Battery
Pack Instructions (Tektronix part number 075-1041-XX)
for information on storage, transportation, and end-of-life
recycling or disposal of the Lithium-Ion battery pack.
International power cords
Your product was shipped with one of the following power
cord options. Power cords for use in North America are
UL listed and CSA certi
fi
ed. Cords for use in areas other
than North America are approved by at least one authority
acceptable in the country to which the product is shipped.
Opt. A0 – North America power
Opt. A1 – Universal EUR power
Opt. A2 – United Kingdom power
Opt. A3 – Australia power
Opt. A5 – Switzerland power
Opt. A6 – Japan power
Opt. A10 – China power
Opt. A11 – India power
Opt. A12 – Brazil power
Opt. A99
1
– No power cord
1
When ordering the A99 option, it is the responsibility of the end user to be
sure that a certi
fi
ed power cord, for the country or region in which it is
installed, is used with this product.
CAUTION.
To reduce risk of
fi
re and shock, use the
certi
fi
ed power cord provided with the product.
Battery pack charging
For optimum performance, charge the battery pack
completely before using it for the
fi
rst time or after
prolonged storage.
CAUTION.
To avoid damage to the product or to other
battery packs, do not use the WFM200BC external
battery charger on any battery pack other than the
WFM200BA battery pack.
To avoid damage to the WFM200BA battery pack, use
only a Tektronix WFM2200, WFM2200A, or WFM2300
waveform monitor or the WFM200BC External Battery
Charger to charge the battery pack. Do not connect any
other voltage source to the battery pack.
To avoid overheating of the batteries during charging,
do not exceed the maximum ambient temperature of
40 °C.
Perform the following steps to charge the WFM200BA
battery pack:
1.
Connect the AC adapter power supply to a mains outlet
and insert the DC plug of the power supply into the
WFM200BC External Battery Charger.
2.
Align the slots on the battery to the slots in the charger
and insert the battery into one of the charger bays.
3.
Note the condition of the charger LEDs:
LED condition
Description
Solid green
Power on / Battery fully
charged
Flashing green
Battery is charging
Solid red
Battery fault
Speci
fi
cations
Characteristic
Description
Output
16.8 VDC
Charge time
5.5 hrs
Adapter requirements
19 V / 3.16 A typical
DC input voltage
range
18–24 V
Operating
temperature
10 °C to +40 °C (+50 °F to +104 °F)
Storage temperature
-20 °C to +60 °C (-4 °F to +140 °F)
Warranty information
For warranty information, go to the www.tektronix.com
Web site, and search for “WFM200BC warranty”.
Contacting Tektronix
Tektronix, Inc.
14200 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
For product information, sales, service, and technical
support:
In North America, call 1-800-833-9200.
Worldwide, visit www.tektronix.com to
fi
nd contacts
in your area.
Copyright © Tektronix, Inc. All rights reserved.
www.tektronix.com
