Tektronix Type B Plug-In, Инструкция по эксплуатации

Страница: 5 / 27

General
Mechanical Specifications:
The Type B Plug-In Unit is a wide-band, high-gain cali­
brated preamp, designed for use with Tektronix Type 530-,
540- and 550 Series Oscilloscopes. The unit contains a dc
am plifier similar to that in the Type A Unit preceded by
a wide-band ac amplifier.
Construction— Aluminum-alloy chassis.
Finish— Photo-etched anodized panel.
W eight— 3 ’/ 2 lbs.
Type B Specifications
Instrument
Used W ith
Transient Response
.05 v to 20 v/cm
Transient Response
.005 v to .02 v/cm
541, 541 A, 543,
545, 545A, 555
Risetime
Pass Band* Risetime Pass Band*
.018 fisec DC— 20 me
2 cps— 20 me ac .03 /isec 3 cps— 12 me
551 .02 /usee DC— 18 me .03
fisec
3 cps— 12 me
531, 531 A, 533,
535, 535A .035
fisec
DC— 10 me
2 cps— 10 me ac .04
fisec
3 cps— 9 me
532
.07 fisec DC— 5 me
2 cps— 5 me ac
.07
fisec
3 cps— 5 me
* Down not more than 3 db a t indicated limits.
Plug-In Unit Am plifier
Risetime at .05 to 2 0 v /c m — .01 fisec.
Risetime at .005 to .02 v/cm — .03 fisec.
Deflection Factor:
.05 v/cm to 50 v/cm dc.
.005 v/cm to 50 v/cm ac.
Signal Inputs— Two signal inputs with more than 60 db iso­
lation.
Step Attenuator:
Twelve positions, calibrated, from .005 v/cm to 20 v/cm,
accurate within 3% when set on any one step.
Maximum Allow able Combined DC and Peak AC
Input Voltage— 600 V.
Input Impedance: — 1 megohm, 47 /ifif.
W ith P410 probe— 10 megohms, 11 /ifif.
W ith P510 probe— 10 megohms, 14 /ifif.
W ith P6000 prove— 10 megohms, 11.5/x/xf-14.5/x/xf.
FUNCTIONS OF CONTROLS
AND CONNECTORS
INPUT A
INPUT B
Separate UHF coax connectors to the pre­
amp by w ay of the INPUT SELECTOR
switch.
INPUT
SELECTOR Four-position switch to select either of the
two inputs and the type of input coupl­
ing.
DC BAL Screwdriver control to adjust the am pli­
fier balance so the trace does not shift
as the VARIABLE control is rotated.
VERTICAL
POSITION
Control to position the trace vertically.
G A IN ADJ. 1
Screwdriver control to set the basic gain
of the dc amplifier.
G A IN ADJ. 2 Screwdriver control to set the gain of the
ac am plifier to 10.
VOLTS/CM
Twelve-position switch to select the cali­
brated vertical-deflection sensitivities.
VARIABLE
Control to vary the gain over a range
of about 2 ’/ 2 to 1.
Accessories
2— Instruction Manuals
® ® I 1-1
http://manoman.sqhill.com