manualshive.com logo in svg

Tektronix Trimode TDP7700 Series, Техническое описание

Поделиться
Скачать
Tektronix Trimode TDP7700 Series Скачать руководство пользователя страница 21

Figure 12: Operating voltage window (common mode, flex tip)

Voltage window with P77C292MM SMA adapter

The P77C292MM adapter operating voltage window is shown in the following figure.

Figure 13: Operating voltage window (P77C292MM SMA adapter)

The A operating voltage window range for the adapter of ±4.0 V is shown on the vertical axis and the B operating voltage
window range of ±4.0 V is shown on the horizontal axis. The dynamic range is also shown on the figure as the smaller
green square.

Similar to the operating voltage for the TekFlex solder-in tips, the dynamic range square labeled Small Signal AC can be
moved around within the limits of the operating voltage window by adjusting the A and B offset voltage settings. The A and
B offset voltage values determine the location of the center of the dynamic range square in the operating voltage window
plot. In C and D mode, only the common-mode and differential offsets are available. These operating windows are
illustrated by the figures below.

Figure 14: Operating voltage window (differential mode, P77C292MM adapter)

Figure 15: Operating voltage window (common mode, P77C292MM adapter)

Theory of operation

TDP7700 Series TriMode™ Probes Technical Reference

13

Содержание Trimode TDP7700 Series







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды