manualshive.com logo in svg

Tektronix THM500 Series, Инструкция по эксплуатации

Поделиться
Скачать
Tektronix THM500 Series Скачать руководство пользователя страница 14

THM500 Series Performance Verification

Bench Test Instruments and Handheld Oscilloscopes Basic Service

11

Functional Test

The following steps verify basic instrument operation and reset the THM500
series instruments to factory default settings.

1.

Install fully charged batteries or use the THMCOM1 Communications
Adapter or the THM5AC Power Adapter optional accessories to provide
power.

2.

Press the 

ON/OFF

 button to turn the THM500 series instrument on.

3.

Press the 

MENU ON/OFF

 button to display the menus.

NOTE

. The THM575 can display the menus in more than one language. The

language selections are located in the Utility menu.

4.

Select 

UTILITY

"

STATUS

"

DISPLAY

 from the menus.

5.

Press the

 SELECT

 button. Verify that the correct THM500 series instrument

model number is displayed.

6.

Use the menus to select 

RESET ALL

. It will appear underlined.

7.

Press the 

SELECT

 button and wait for the confirmation message; then press

the 

SELECT

 button again.

8.

Verify that the instrument returns to its power-on mode:

H

THM550, THM560, THM565, THM570, or THM570U instruments
return to METER mode.

H

THM571, THM575, or THM570U Option 3K instruments return to a
banner screen.

Содержание THM500 Series




























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды