Tektronix TDSUSB2, Руководство пользователя

Страница: 77 / 250

Tutorial
Introduction to the Tutorial
The tutorial teaches you how to set up the application by recalling a .tsv file, take
measurements, and view the results. More operating information is available in
the Operating Basics section. Before you begin the tutorial, you must do the
following tasks:
Start the application
Recall a .tsv file
Starting the Application
To start the application, select File> Run Application> USB2.0 Test Package or
App > USB2.0 Test Package or Analyze > USB2.0 Test Package.
Recalling a .tsv File
The application distribution includes the .tsv files used with this tutorial. The
table below shows the types of signals that represent these waveforms.
Table 9. .tsv files
Tsv File name Signal type
C:\TekApplications\tdsusb2\tsvfiles\LS_SQC.tsv Low Speed
C:\TekApplications\tdsusb2\tsvfiles\FS_SQC.tsv Full Speed
C:\TekApplications\tdsusb2\tsvfiles\HS_sqc.tsv High Speed
C:\TekApplications\tdsusb2\tsvfiles\inrush.tsv Low/Full/High Speed
TDSUSB2 Universal Serial Bus Measurement Package
63