Tektronix TD140, Руководство по техническому обслуживанию аппаратной части

Страница: 12 / 49

TD140 Hardware Maintenance Guide 7.13.2 10
1
TD140 Overview Rev. 001-140228
Table 1.4
lists the TD140 Ethernet Cables/Connections.
Default Port Settings
Table 1.5
lists the default port settings for the TD140.
Table 1.4 - TD140 Ethernet Cables/Connections
Cable Type TD140 Connection Connects To
1 CAT5e or CAT6, Shielded
1G Ethernet, 1000base-T via RJ45
Shelf Management Controller (ShMC)
OAM port
PPM40 blade 1, ETH port
Local Area Network
2 10G Fiber Optic PPM40 blades, Ports 1-4
PPM40 RTMs, Ports 5-8
G10 probes
TRM100 RTM or IIC200
10G ports
3 1G or 10G Fiber Optic PPM40 RTMs
Ports 9-16
Taps, spans, or aggregation
Table 1.5 - TD140 Default Port Settings
TD140 Port Speed Negotiation Data
Transmission
OAM Port (Shelf Management Module) 1 Gbps Auto Full duplex
ETH Port (PPM40 Blade 1) 1 Gbps Auto Full duplex
10G ports (PPM40 Ingress and Egress ports) 10 Gbps Auto Full duplex
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited