Tektronix TD140 Скачать руководство пользователя страница 2

Страница: 2 / 49

by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in

all previously published material. Specification and price change privileges reserved. TEKTRONIX

and TEK are registered trademarks of Tektronix, Inc. The GeoProbe system uses the SmartHeap

product for memory management. SmartHeap is a product of Compuware Corporation,

trademarks or registered trademarks of their respective companies.

Tektronix Communications

3033 W President George Bush Highway

Plano, Texas 75075

+1 469-330-4000 (voice)

www.tekcomms.com

Web site

[email protected]

(Technical Publications email)

[email protected]

(Technical Publications email)

Plano, Texas USA - serves North America, South America, Latin America

+1 469-330-4581 (Customer Support voice)

[email protected]

(Customer Support USA email)

London, England UK - serves Northern Europe, Middle East, and Africa

+44-1344-767-100 (Customer Support voice)

[email protected]

(Customer Support UK email)

Frankfurt, Germany DE - serves Central Europe and Middle East

+49-6196-9519-250 (Customer Support voice)

[email protected]

(Customer Support DE email)

Padova, Italy IT - serves Southern Europe and Middle East

+39-049-762-3832 (Customer Support voice)

[email protected]

(Customer Support IT email)

Melbourne, Australia - serves Australia

+61 396 330 400 (Customer Support voice)

[email protected]

(Customer Support Australia and APAC email)

Singapore - serves Asia and the Pacific Rim

+65 6356 3900 (Customer Support voice)

[email protected]

(Customer Support APAC and Australia email)

Tektronix Communications, Inc. Proprietary Information

992-0476-08-001-140228

The products and specifications, configurations, and other technical information regarding the

services described or referenced in this document are subject to change without notice. All

statements, technical information, and recommendations contained in this document are believed

to be accurate and reliable but are presented “as is” without warranty of any kind, express or

implied. Users must take full responsibility for their application of any products specified in this

document. Tektronix, Inc. makes no implied warranties of merchantability or fitness for a purpose

as a result of this document or the information described or referenced within, and all other

warranties, express or implied, are excluded.

Except where otherwise indicated, the information contained in this document represents the

planned capabilities and intended functionality offered by the product and version number

identified on the front of this document. Screen images depicted in this document are

representative and intended to serve as example images only. Wherever possible, actual screen

images are included.

Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited

Содержание TD140


















































Результаты поиска

Содержание TD140

Отзывы:

Бренды по названию

Популярные бренды

Tektronix TD140, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание TD140

Отзывы:

Бренды по названию

Популярные бренды