Tektronix SD-42, Руководство пользователя

Страница: 24 / 48

SD-42 & SD-46 User Manual
3–1
Performance Check
Use the following procedure to check that your SD-42/SD-46 Optical-to-Electri-
cal Converter Head is performing within specifications.
Table 3–1 is a list of equipment required to accomplish the Incoming Inspection
Procedure. Test equipment recommended is the minimum necessary to provide
accurate results; therefore, substitute equipment must meet or exceed the
specifications of the equipment listed. Detailed operating instructions for test
equipment are not contained in this procedure. Should additional operating
information be needed, refer to the appropriate test equipment instruction
manual.
Table 3–1: Test Equipment Required
Item Description Performance Requirement Recommended Example
Oscilloscope Tektronix Digital Sampling
Oscilloscope Tektronix 11801A or CSA 803
Sampling Head Tektronix SD-22/SD-24/SD-26
Digital Multimeter Tektronix DM 504A
Optical Impulse Generator 1300 nm wavelength, FWHM
≤
30 ps, 60 ns pretrigger
Tektronix OIG 502
Optical Attenuator Single mode, 1300 nm,
0–60 dB Tektronix OA 5002
Power Supply for OA 5002,
OIG 502, and DM 504A Tektronix TM5006 Power
Module
CW Laser Source 1300 nm, FC/PC connections Tektronix ECL-to-Light Kit (part
number 802–9249–06) using
the LDM 1301 Laser Module
from Photonic Packaging
Technology Co.
Power Supply for CW
Laser Source Tektronix PS 503A
Coaxial cable for pulse trigger, BNC connec-
tions Tektronix part number:
012–0482–00
Optical fiber cable Single mode, FC/PC connec-
tions Tektronix part number:
174–1387–00
BNC-SMA adapter Tektronix part number:
015–1018–00
Test Equipment
Requirement