Tektronix RTPA2A, Инструкция по эксплуатации

Страница: 18 / 44

Getting Started
8
RTPA2A Instruction Manual
4. Install a 50
Ω
SMA-to-N cable (also to the spectrum analyzer RF input).
Torque to 8 in-lb .
CAUTION.
To prevent damage to the probe or spectrum analyzer, do not exceed
the voltage ratings specified on your TekConnect probe. For further probe
information, refer to your probe instruction manual, and if necessary, the
ABC’s
of Probes on the Tektronix Web site.
5. Install a P7000 Series TekConnect probe.
All procedures in this instruction manual agree with the cable configurations
shown in the CONNECTIONS table.
NOTE
. The CONNECTIONS table on the front of the probe adapter recommends
cable and probe connections to the spectrum analyzer. For the spectrum analyzer
to apply correct probe--related amplitude offsets, you must connect the cables as
shown under columns A and B. See the RTPA2A Real-Time Spectrum Analyzer
TekConnect Probe Adapter Setups Quick Reference for instructions on setting up
these connections.
CONNECTIONS Table