Tektronix RM5, Инструкция по эксплуатации

Страница: 16 / 20

6. Install the rack platform in your equipment rack by inserting the platform into the slides as shown.
Figure 7: Installation of rack mounted instrument assembly in rack (top view)
WARNING. To avoid personal injury and prevent the instrument from tipping or dropping, use two or more people to install
this instrument into the rack cabinet.
After completing the installation procedure, verify that the instrument and the rack cabinet will not tip forward while the
instrument is in the extended position.
Do not leave the instrument extended when finished accessing the instrument.
7. Install the power cord. Provide access to a power plug or mains disconnect switch for turning the instrument on/off.
8. Optionally install any cables you need connected to the instrument rear panel.
9. Slide the instrument into the equipment rack, and secure the instrument to the rack using standard rack hardware.
RM5 Installation instructions
10 RM5 Rackmount Kit