Tektronix RM4000, Инструкция по эксплуатации

Страница: 5 / 22

RM4000 Rackmount Kit
3
Kit Description
This introduction describes the installation of the rackmount kit to your standard
bench-top instrument.
The rackmount kit is a collection of parts that, once installed, configure the
instrument for mounting into a standard 19-inch equipment rack.
This document supports Tektronix modification: ECR31404.
Products
DPO4000 Series
All Serial Numbers
MSO4000 Series All Serial Numbers
Kit Parts List
Table 1 lists the parts included in this rackmount kit. The parts are shown in
Figure 1.
Table 1: RM4000 Rackmount kit (see figure
1
on page
4)
Item Quantity Part number Description
-1 1 each 386-7420-xx PLATE, MOUNTING; RACKMOUNT LEFT
-2 1 each 386-7421-xx PLATE, MOUNTING; RACKMOUNT RIGHT
-3 2 each 367-0525-xx HANDLE, CARRYING; 0.375 AL, POWDER
COAT, PEKING GRAY
-4 1 each 386-7466-xx PLATE, SUPPORT; RACKMOUNT TOP
-5 1 each 386-7467-xx PLATE, SUPPORT; RACKMOUNT BACK
-6 12 each 211-0722-xx SCREW, MACHINE; 6--32 X 0.250, PNH, 410 SS
PASSIVATED, T--15 TORX DR
-7 4 each 212-0577-xx SCREW, MACHINE; 10--32 X 0.625, TRH, 410
SS, PASSIVATE, POZ
-8 4 each 212-0681-xx SCREW, MACHINE; 10--32 X 0.25, PNH, 410
SS, PASSIVATE, T25 TORX
-9 4 each 361-1832-xx SPACER, RECTANGULAR WASHER .888 X
1.000 X .225
-10 1 each 351-1095-xx SLIDE ASSY; PAIR, W/STD HARDWARE KIT
AND REAR BRACKET
-11 4 each 211-0734-xx SCREW, MACHINE; 6--32 X 0.250, FLH100, 410
SS PASSIVATED, T--10 TORX
------------------ 1 each 071-2134-01 TECH MANUAL: INSTRUCTIONS, RACK-
MOUNT KIT, TEKTRONIX 4000 SERIES