manualshive.com logo in svg

Tektronix R3051, Инструкция по эксплуатации

Поделиться
Скачать
Tektronix R3051 Скачать руководство пользователя страница 14

TMS 420 R3051, R3052 & R3081 Microprocessor Support Instruction Manual 

1–1

Getting Started

This chapter provides information on the following topics and tasks:

H

A description of the TMS 420 microprocessor support package

H

Logic analyzer software compatibility

H

Your System Under Test (SUT) requirements

H

Support restrictions

H

How to configure your probe adapter

H

How to connect to your SUT

Support Description

The TMS 420 microprocessor support package disassembles data from systems
that are based on the Intel MIPS R3051, R3052, and R3081 microprocessors and
their “E” versions. The support runs on a compatible Tektronix logic analyzer
equipped with a 102/136-channel module or a 96-channel module.

Refer to information on basic operations to determine how many modules and
probes your logic analyzer needs to meet the minimum channel requirements for
the TMS 420 microprocessor support.

Table 1–1 shows the microprocessors and packages from which the TMS 420
support can acquire and disassemble data.

Table 1–1: Supported microprocessors 

Name

Package

R3051/E

PGA, PLCC

R3052/E

PGA, PLCC

R3081/E

PGA, PLCC

A complete list of standard and optional accessories is provided at the end of the
parts list in the Replaceable Mechanical Parts chapter.

To use this support efficiently, you need to have the items listed in the informa-
tion on basic operations as well as the R3051, R3052 and R3081 Microprocessor
User’s Manual, Intel, 1991

Information on basic operations also contains a general description of supports.

Содержание R3051

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды