Tektronix PWS4205, Руководство программиста

Страница: 49 / 90

Commands Listed in Alphabetical Order
Examples
*SRE 48
sets the bits in the SRER to 00110000 binary.
*SRE
? might return a value of
32
, showing that the bits in the SRER have the
binary value 00100000.
STATus:OPERation:CONDition? (Query Only)
This command returns the contents of the operation condition register (OCR).
Details on the OCR are available in this manual. (See page 3-1,
Status and Events .)
Group Status
Syntax
STATus:OPERation:CONDition?
Related Commands STATus:OPERation:ENABle , STATus:OPERation[:EVENt]?
Returns
<NR1>
is a decimal integer representation of the contents of the Operation
Condition Register (OCR), ranging from 0 to 255.
Examples
STATUS:OPERATION:CONDITION?
might return
4
, which would indicate that
the power supply is in constant voltage mode.
STATus:OPERation:ENABle
This command sets and queries the contents of the operation enable register
(OENR). The OENR is an eight-bit mask register that determines which bits in
the Operation Event Register (OEVR) will affect the state of the OPER bit in the
Status Byte Register (SBR). Details about the status registers are available in this
manual. (See page 3-1,
Status and Events .)
Group Status
Syntax
STATus:OPERation:ENABle <NR1>
STATus:OPERation:ENABle?
Related Commands STATus:OPERation:CONDition? , STATus:OPERation[:EVENt]?
Arguments
<mask>::=<NR1>
where
PWS4205, PWS4305, PWS4323, PWS4602, and PWS4721 Power Supply Programmer Manual 2-37