Tektronix PSPL2600C, Руководство пользователя

Страница: 9 / 32

Important safety information
This manual contains information and warnings that must be followed by the user
for safe operation and to keep the product in a safe condition.
To safely perform service on this product, additional information is provided at
the end of this section. (See page v,
Service safety summary .)
General safety summary
Use the product only as speci fi ed. Review the following safety precautions to
avoid injury and prevent damage to this product or any products connected to it.
Carefully read all instructions. Retain these instructions for future reference.
Comply with local and national safety codes.
For correct and safe operation of the product, it is essential that you follow
generally accepted safety procedures in addition to the safety precautions speci
fi ed
in this manual.
The product is designed to be used by trained personnel only.
Only quali fi ed personnel who are aware of the hazards involved should remove
the cover for repair, maintenance, or adjustment.
Before use, always check the product with a known source to be sure it is
operating correctly.
This product is not intended for detection of hazardous voltages.
Use personal protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
While using this product, you may need to access other parts of a larger system.
Read the safety sections of the other component manuals for warnings and
cautions related to operating the system.
When incorporating this equipment into a system, the safety of that system is the
responsibility of the assembler of the system.
To avoid fi re or personal
injury
Use proper power cord.
Use only the power cord speci fi ed for this product and
certi fi ed for the country of use.
Do not use the provided power cord for other products.
Use proper voltage setting. Before applying power, make sure that the line
selector is in the proper position for the source being used.
Ground the product.
This product is grounded through the grounding conductor
of the power cord. To avoid electric shock, the grounding conductor must be
Tektronix PSPL2600C Pulse Generator User Manual iii