Tektronix Phaser 840, Краткое руководство пользователя

Страница: 68 / 160

58
Phaser 840 Color Printer
Image prints in black-and-white
1.
In the Chooser , ensure a color printer icon is displayed next to the
Phaser 840 in the list of available printers. This indicates the printer’s
PPD has been selected and configured.
2. In the Print dialog box, make sure that the Color/Grayscale option has
been selected.
3. Make sure that the Phaser 840 printer icon was selected in the Chooser .
Try printing the job again.
4.
Check the version of your LaserWriter driver to ensure that it is version
6.0.x or higher. Earlier versions of the driver do not support color
PostScript.
5. The application may require special instructions to print, such as those
contained in a
.PPD file; check in the Phaser 840 Printer CD-ROM .
Image is rotated 90 degrees
1. In the application's Page Setup , make sure that the image is selected to
print in Portrait or Landscape orientation, as you expect.
Printer isn’t in the Chooser
1. Ensure that the printer is turned on and the rear panel health light is
flashing at a regular rate.
2.
Check the Network or AppleTalk control panel to ensure the proper
network or zone is selected.
3.
Check to see if the printer has not been renamed or placed in another
zone. You can print a Configuration Page, which lists this EtherTalk
information as well as other information about the printer.
Windows printing problems
Image never prints
The printer’s front panel
Receiving data
message is displayed as if receiving
data, but nothing comes out of printer or the printer goes back to
Ready to
Print
mode without printing an image.
1.
From the printer driver, under the printer's set up options, set
TRANSMISSION RETRY = 850 .