Tektronix P6910, Инструкция по эксплуатации

Страница: 34 / 48

Reference
Probe signal names
Use signal names to simplify probe connections to the logic analyzer.
Refer to the following tables for information on signal connections. Match the
alpha character that precedes the channel identi
fi er (for example, E3:7) to the
probe head label.
All differential data and clock/quali fi ers on the probe may have the negative input
pin grounded and be used as a single-ended input.
You can fi nd more information on 2X and 4X demultiplexing channel assignments
in the Demultiplexing Information section. (See Table 2 on page 18.) (See Table 3
on page 19.)
Table 4: Signal connections on 136- and 102-channel instruments for probe 4 and probe 3
Signal
name
Podlet
Probe 4 way station for 136-channel instrument
only Probe 3 way station for 136- and 102-channel
instruments
Clk/Qual Clk/Qual Q3- Q2- CK0- Q0-
Clk/Qual+ Clk/Qual Q3+ Q2+ CK0+ Q0+
Data 7- 7 E3:7- E2:7- E1:7- E0:7- A3:7- A2:7- D3:7- D2:7-
Data 7+
7
E3:7+ E2:7+ E1:7+ E0:7+ A3:7+ A2:7+ D3:7+ D2:7+
Data 6- 6 E3:6- E2:6- E1:6- E0:6- A3:6- A2:6- D3:6- D2:6-
Data 6+ 6 E3:6+ E2:6+ E1:6+ E0:6+ A3:6+ A2:6+ D3:6+ D2:6+
Data 5- 5 E3:5- E2:5- E1:5- E0:5- A3:5- A2:5- D3:5- D2:5-
Data 5+ 5 E3:5+ E2:5+ E1:5+ E0:5+ A3:5+ A2:5+ D3:5+ D2:5+
Data 4- 4 E3:4- E2:4- E1:4- E0:4- A3:4- A2:4- D3:4- D2:4-
Data 4+ 4 E3:4+ E2:4+ E1:4+ E0:4+ A3:4+ A2:4+ D3:4+ D2:4+
Data 3- 3 E3:3- E2:3- E1:3- E0:3- A3:3- A2:3- D3:3- D2:3-
Data 3+ 3 E3:3+ E2:3+ E1:3+ E0:3+ A3:3+ A2:3+ D3:3+ D2:3+
Data 2- 2 E3:2- E2:2- E1:2- E0:2- A3:2- A2:2- D3:2- D2:2-
Data 2+ 2 E3:2+ E2:2+ E1:2+ E0:2+ A3:2+ A2:2+ D3:2+ D2:2+
Data 1- 1 E3:1- E2:1- E1:1- E0:1- A3:1- A2:1- D3:1- D2:1-
Data 1+ 1 E3:1+ E2:1+ E1:1+ E0:1+ A3:1+ A2:1+ D3:1+ D2:1+
Data 0- 0 E3:0- E2:0- E1:0- E0:0- A3:0- A2:0- D3:0- D2:0-
Data 0+ 0 E3:0+ E2:0+ E1:0+ E0:0+ A3:0+ A2:0+ D3:0+ D2:0+
20 P6910 General Purpose Probe Instruction Manual