Tektronix P6450, Инструкция по эксплуатации

Страница: 41 / 51

Speci fi cations
Mechanical and Electrical Speci fi cations
The mechanical and electrical speci fi cations for the P6450 probe are listed below.
(See Table 5.) The electrical speci fi cations apply when the probe is connected
between a compatible logic analyzer and a target system.
Refer to the Tektronix TLA5000B Logic Analyzer Product Speci fi cations &
Performance Veri fi cation document (available on the Tektronix Logic Analyzer
Family Product Documentation CD or downloadable from the Tektronix Web
site) for a complete list of speci fi cations, including overall system speci fi cations.
Table 5: Mechanical and electrical speci fi cations
Characteristic P6450
Threshold accuracy ±100 mV
Input resistance 20 k Ω ±1%
Input capacitance 0.7 pF
Minimum digital signal swing 500 mV p-p
Maximum nondestructive input signal to
probe ±15 V
Delay from probe tip to module input
connector 7.33 ns
Probe length
1.8 m (6 ft)
Operating range
+6.5 V to -3.5 V
The following table lists environmental speci fi cations for the probe. (See Table 6.)
The probe is designed to meet Tektronix standard 062-2847-00 class 5.
Table 6: Environmental speci fi cations
Characteristic P69xx
Temperature
Operating
Non-operating 0 °C to +50 °C (0 °F to +122 °F)
-51 °C to +71 °C (-60 °F to +160 °F)
Humidity 10 °C to 30 °C (+50 °F to +86 °F) 95%
relative humidity
30 °C to 40 °C (+86 °F to +104 °F) 75%
relative humidity
40 °C to 50 °C (+104 °F to +122 °F) 45%
relative humidity
Altitude Operating
Non-operating 9843 ft (3,000 m)
40,000 ft (12,192 m)
Electrostatic immunity 6 kV
P6450 High-Density Logic Analyzer Probe Instruction Manual 25