P6101B Instructions
1
General Safety Summary
Review the following safety precautions to avoid injury and prevent
damage to this product or any products connected to it. To avoid
potential hazards, use this product only as specified.
To Avoid Fire or Personal Injury
Observe Maximum Working Voltage.
Do not use the P6101B probe
above 300 V
RMS
, CAT II. Refer to the derating chart, Figure 1, on
page 7.
Do Not Elevate the Common Terminal.
The common terminal is at
ground potential. Do not connect the common terminal to elevated
voltages.
Do Not Operate With Suspected Failures.
If you suspect there is damage
to this product, have it inspected by qualified service personnel.
Do Not Operate in Wet/Damp Conditions.
Do Not Operate in an Explosive Atmosphere.
Keep Product Surfaces Clean and Dry.
Safety Terms and Symbols
Terms in This Manual.
These terms may appear in this manual:
WARNING.
Warning statements identify conditions or practices that
could result in injury or loss of life.
CAUTION.
Caution statements identify conditions or practices that
could result in damage to this product or other property.
