Tektronix MTM400, Техническое описание

Страница: 15 / 32

User Interface Overview
Packets View In DVB mode, the Packets view displays SFN (single frequency network) data if
detected in the stream. In ISDB-T mode, this view displays ISDB-T information
packets (IIPs) and TMCC information, if detected in the stream.
The contents of the DTV monitor Packets view are broadly equivalent to the
following MTM400 screens: Stream view: SFN and TMCC.
Interface View The Interface view provides a central location for information related to the IP
and RF interface cards (where installed).
Test results
Graphical representation of speci fi c IP and RF card measurements
IP and RF card readings and control settings
The graphical views display a selection of graphs of instantaneous measurements
and measurement trends. Trend graphs use accumulated readings to represent
trends in selected readings for up to a week. Also available are an Event Log
and a Parameter view.
The Interface tab is displayed only when an interface card is installed; only one
interface card at a time can be installed.
The contents of the DTV monitor Interface view are broadly equivalent to the
following MTM400 screens: Stream view: Con
fi guration (interface) and Input
Card.
Tear-off Views
The ability of the MTM400 to display multiple detail views at the same time
is replicated in the DTV monitor using the tear-off function. Any detail view
displaying the tear-off icon shown below can be displayed as a separate window.
The tear-off window will continue to be updated independently of the main
application. The displayed content can also be modi
fi ed independently of the
main display.
Figure 2: Tear-off icon
MTM400 and MTM400A RUI v3.x Upgrade Technical Reference 7