Tektronix MTD200, Руководство пользователя

Страница: 126 / 211

Remote Control
MTD200 MPEG Test Decoder User Manual
5–29
Command Parameter Unit Notes
HCOPy
:MONitoring
:DATA?
Prints the contents of the MONITORING/
STATISTICS menu in the form of block
data
:REPort
:DATA?
Prints the lines of the MONITORING/RE-
PORT menu that have been added since
the last report print in the form of block
data
:LINes
:DATA? 0 to 999, 0 to 999
Prints from line n to line m of the
MONITORING/REPORT menu in the
form of block data
:SETTings
:DATA Prints the current unit settings in the form
of block data.
:PROGram
:DATA?
Prints the contents of the applied
transport stream in the form of block data.
HCOPy
This node provides the commands for reading data as they are sent. In manual
operation these commands are sent to the printer using the functions of the
PRINT menu. The commands come as block data of defined length. After
removing the block data header and the end character, the data can be sent
directly to the printer.
HCOPy :MONitoring :DATA?
This command reads the displayed MONITORING/STATISTICS menu in the
form of block data.
Example: HCOP:MON:DATA?
Response: #41345DVMD...
HCOPy :REPort
With all commands under this node, the report entries are read in the form of
block data.
HCOPy :REPort :DATA?
This command reads out the print data report for the MONITORING/REPORT
menu lines in the form of block data
Commands of the PRINT
Menu