Tektronix Keithley SourceMeter 2470, Справочное руководство

Страница: 457 / 995

Section 12: SCPI command reference 2470 High Voltage SourceMeter Instrument Reference Manual
12-70 2470-901-01 Rev. A /
May
2019
:SOURce[1]:CONFiguration:LIST:QUERy?
This command returns a list of TSP commands and parameter settings that are stored in the specified
configuration index.
Type Affected by Where saved Default value
Query only Not applicable Not applicable Not applicable
Usage
:SOURce[1]:CONFiguration:LIST:QUERy? "<name>", <point>
:SOURce[1]:CONFiguration:LIST:QUERy? "<name>", <point>, <fieldSeparator>
<name> A string that represents the name of a source configuration list
<point>
A number that defines a specific configuration index in the configuration list
<fieldSeparator> A separator for the data:

Comma (default):
1

Semicolon:
2

New line:
3
Details
This command can only return data for one configuration index. To get data for additional
configuration indexes, resend the command and specify different configuration indexes.
Refer to Instrument settings stored in a source configuration list (on page 4-88) for a complete list of
source settings that the instrument stores in a source configuration list.
Example
:SOUR:CONF:LIST:QUER? "MySourceList", 2
Returns the TSP commands and parameter settings that represent the settings in configuration index 2.
Also see
Configuration lists (on page 4-83)
:SOURce[1]:CONFiguration:LIST:CREate (on page 12-68)
Instrument settings stored in a source configuration list (on page 4-88)