Model 4200-TRX-* Triaxial Cable Assembly
Instruction Sheet
PA-702 Rev. B / September 2016
*PPA-702B*
1
Keithley Instruments
28775 Aurora Road
Cleveland, Ohio 44139
1-800-935-5595
http://www.tek.com/keithley
Description
The 4200-TRX-* Triaxial Cable Assembly consists of a standard triaxial cable terminated with a standard 3-slot
male triaxial connector on each end.
You can use this cable assembly for connections such as:
•
Connecting a 4200-PA Preamplifier in the 4200-SCS or 4200A-SCS Parameter Analyzer to the device
under test (DUT).
•
Connecting the 4200A-SCS Parameter Analyzer to the 4200A-CVIV Multi-Switch (4200-TRX-0.75).
•
Connecting to the FORCE or SENSE terminal on the 4200-SCS or 4200A-SCS ground unit.
One end connects to the FORCE connector on the 4200-PA installed in the system. The other end connects to
the test fixture or probe station holding the DUT.
The 4200-TRX-* is available in different lengths. The -* in the model number represents the cable length in
meters (see next table).
Cable lengths
Model number
Cable length (m)
Cable length (ft)
4200-TRX-0.3
0.3
1
4200-TRX-0.75
0.75
2.5
4200-TRX-1
1.0
3.2
4200-TRX-2
2.0
6.5
4200-TRX-3
3.0
9.8
Figure 1: Model 4200-TRX-* cable
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com