Error Messages
Series 2268 850 Watt DC Power Supplies Reference Manual
244
2268S-901-01 Rev. A / January 2015
Command Error List
An error in the range [-199, -100] indicates that an IEEE 488.2 syntax error has been detected
by the instrument's parser. The occurrence of any error in this class causes the command
error bit (bit 5) in the Event Status Register to be set.
Command Error List
Error
Code
Error Message Description
-100
Command error This is the generic syntax error
-102
Syntax Error An unrecognized command or data type was
encountered; for example, a string was received when the device
does not accept strings.
-108
Parameter not Allowed More parameters were received than
expected for the header; for example, the *SRE common
command only accepts one parameter, so receiving *SRE 0,1 is
not allowed.
-109
Missing Parameter Fewer parameters were received than
required for the header; for example, the *SAV common
command requires one parameter, so receiving *SAV is not
allowed.
-110
Command header error An error was detected in the header.
-113
Undefined header The header is syntactically correct, but it is
undefined for this specific device; for example, *XYZ is not
defined for any device.
-121
Invalid character in number An invalid character for the data
type being parsed was encountered; for example, an alpha in a
decimal numeric or a “9” in octal data.
-140
Character data error This error is generated when parsing a
character data element.
-150
String data error This error is generated when parsing a string
data element fails.
-151
Invalid string data A string data element was expected, but was
invalid for some reason (see
IEEE 488.2,
7.7.5.2); for example,
an END message was received before the terminal quote
character.
Содержание Keithley 2268 Series
Страница 102: ......