manualshive.com logo in svg

Tektronix Grass Valley 3000, Руководство пользователя

Поделиться
Скачать
Tektronix Grass Valley 3000 Скачать руководство пользователя страница 157

4-19

Wipe Operations

Fade to Black

You can cut, wipe, or fade the switcher output to black at any time 
by simply pressing the 

PST

 

BLACK 

button on the Transition 

Subpanel. Then, pressing the 

CUT

 button cuts to black, while 

AUTO TRANS or a Lever Arm transition will do either a mix or 
wipe to black depending on the delegation status on the 
Transition Subpanel. 

The transition to black takes precedence over the entire output of 
the M/E. Therefore everything will go to black regardless of panel 
delegation.

When black is reached it is automatically selected on the A Bus 
regardless of which crosspoint button it is mapped to. (If it is not 
mapped, all buttons will be unlit.)

To transition from black:

1.

Make a transition using cut, mix, or wipe.

– OR–

2.

Cut to a new source on the A Bus.

NOTE:  

If you cut on the A Bus, any keys that would have transitioned 

‘ON’ are dropped.

Содержание Grass Valley 3000





























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды