Tektronix DS1001, Руководство пользователя

Страница: 41 / 130

Reference
DS1000 Series User Manual
3–3
4. Use the up and down buttons (
↑
and
↓
) to select a configuration
item. Use the left and right buttons (
←
and
→
) to change the
selected configuration item.
5. Press the CONFIG button after making the desired changes. If you
have made no changes, then the Configuration menu returns. If
you have made changes, then you are asked if you want to save the
changes. Use the left and right buttons (
←
and
→
) to select either
yes or no, then press the enter button (
↵
).
6. To exit the configuration mode, press the DISPLAY button.
Program Configuration
The Program selection in the Configure menu allows you to modify a
Program. Before entering the Configure menu, you must select the
Program number you wish to modify.
To modify a Program, press the Program button and use the up and
down buttons (
↑
and
↓
) to choose the program number you wish to
modify. Then press the CONFIG button to access the Configuration
menu. The top level selection is Program. Press the enter button (
↵
) to
enter the Program Config menu. Use the up and down buttons
(
↑
and
↓
) to choose and change any of the following selections:
1. Frequency tables.