Analyzing waveforms
3.
When you select the
Custom_Setup
,
additional controls are shown on the
display so you can browse for a setup
fi
le. The usual idea is to start with a
setup that is close to what you want,
use the UI to specify the settings you
desire, and then save the result. When
you enter a new name for the
fi
le in the
fi
le name text control, press
Enter
to
have your editing changes accepted.
Then press the
Save
button to save the
setup into the
fi
le. To recall a setup
fi
le,
browse to the
fi
le you want and press
Open. The default location for Error
Detector setup
fi
les is C:\Users\Pub-
lic\Tektronix\TekScope\ErrorDetector.
4.
Select the
Setup
tab.
5.
From the
Source Setup
tab, select the
Serial Bus, Data Rate and signal Source
from the drop-down lists.
6.
Click the Error Detection option button
for the type of error you want to detect.
The
Advanced
button will open the
Advanced Settings window.
The advanced settings window provides
controls for parameters that you may need
to change for special testing. The default
settings for these values are correct for most
devices.
7.
Click
On
or
Off
to turn Spread Spectrum
Clocking (SSC Tracking) on or off.
SSC is on by default.
136
MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series User Manual
