Tektronix DPO5000 Series Скачать руководство пользователя страница 190

Страница: 190 / 352

2. Confirm input channels are within limits for DC accuracy at maximum offset,

position, and termination voltage:

Do the following substeps - test Ch 1 first,

skipping substep

2.a of this step

since Ch 1 is already selected from step

a. Select an unchecked channel:

■

From the button bar, touch

Measure

and then

Clear All

to remove

the previous measurement.

■

Press the Vertical button of the channel just confirmed to remove the
channel from the display.

■

Press the front-panel Vertical button that corresponds to the channel
you are to confirm.

■

Set the generator output to 0 V.

■

Move the test hookup to the channel you selected.

b. Turn on the measurement Mean for the channel:

■

From the button bar, touch

Measure

and select the

Ampl

tab,

More

and then touch

Mean

to measure the mean of the current channel.

■

Press the

(Close) button.

NOTE.

If any of the voltages supplied by your generator are not

calibrated, verify those generator voltages using a digital multimeter,
item 27.

c. Set the vertical scale:

Set the vertical

Scale

to one of the settings listed in

the following table that is not yet checked, starting with the first setting
listed.

Table 6: DC voltage measurement accuracy

Scale setting

Termination setting Offset setting

Generator setting

Accuracy limits

6.25 mV

+3.5 V

+3.4 V

3.419 V

3.4012 V to 3.4363 V

+3.5 V

+2.4 V

2.419 V

2.4032 V to 2.4343 V

+1.5 V

+2.5 V

2.509 V

2.49345 V to 2.52456 V

+1.5 V

1.509 V

1.49945 V to 1.51856

+1.5 V

+0.5 V

509 mV

501.45 mV to 516.56 mV

0 V

18.5 mV

14.76 mV to 22.25 mV

0 V

–1.0 V

-991 mV

-1.00056 V to -981.45 mV

0 V

+1.0 V

1.009 V

999.45 mV to 1.01856 V

-3.5 V

-3.4 V

-3.419 V

-3.4363 V to -3.4012 V

-3.5 V

-2.4 V

-2.419 V

-2.4343 V to -2.4032 V

Set as precisely as the instrument's offset resolution permits.

Performance verification (MSO/DPO70000C, MSO/DPO70000DX, and DPO7000C series)

178

MSO70000C/DX, DPO70000C/DX, DPO7000C, MSO5000/B, DPO5000/B Series

Содержание DPO5000 Series

































































































































































































































































































































































Результаты поиска

Содержание DPO5000 Series

Отзывы:

Бренды по названию

Популярные бренды

Tektronix DPO5000 Series, Техническое описание

Результаты поиска

Содержание DPO5000 Series

Отзывы:

Бренды по названию

Популярные бренды